Sound Settings - Alpine IVE-W560BT Mode D'emploi

Steering Control
You can operate the unit with buttons on the steering wheel.
For safety, park your car before changing this setting.
Unit status: Any status
Option Purpose
Custom To display the instruction and panel for steering
wheel control.
To deactivate steering wheel control.
Preset ( )
To use rotary commander control.
User Defined
This setting is available only when [Steering Control] is set to [User].
The steering button panel appears.
1
Press and hold the button you want to assign to the steering
wheel. The button on the panel lights up (standby).
2
Press and hold the button on the steering wheel you want to
assign the function to. The button on the panel changes to blue
(registration complete).
3
To register other buttons, repeat steps
Unit status: Any status
Option Purpose
– To display the instruction and control panel.
Notes
 If an error occurs while registering, all the registered information is
cleared. Restart registration from the beginning.
 If the setting menu is left and settings are reconfigured, all
registered information are cleared and the registration process
starts from beginning.
 This function may not be available on some vehicles.For details on
the compatibility of your vehicle, visit the support site on the back
page.
HOME Key Function (hold 2 sec push)
Unit status: Any status
Option Purpose
To assign the voice command function or the
Voice, DSPL ( )
display menu to the HOME button.
Bluetooth Connection
Unit status: Any status
Option Purpose
To activate the BLUETOOTH signal.
ON, OFF ( )
Bluetooth Device Info
Unit status: Any status
Option Purpose
– To display the device connecting to the unit by
touching [Open]. (Available only when [Bluetooth
Connection] is set to [ON].)
Bluetooth Reset
Unit status: Any status
Option Purpose
– To initialize all BLUETOOTH-related settings such
as pairing information, call history, preset dial,
history of connected BLUETOOTH devices, etc.

Sound Settings

Rear/Sub Out
Switches the audio output between the rear speakers and subwoofer.
Unit status: Any status
Option
Rear
Subwoofer (
Sound Adjust
Selects 3 BAND EQ and adjusts subwoofer level, balance/fader level
or crossover filter.
Unit status: Any status
Option
1 2
and .
3BAND EQ
Flat (
Pop,
Rock,
News,
Jazz,
Electronic,
Hip Hop,
Easy list.,
Country,
Classical
Custom
Subwoofer:
(MUTE, –10 - +10)
: 0
Balance:
(L 15 - 0 - R 15)
: 0
Fader:
(Front 15 - 0 -
Rear 15)
: 0
HPF: 80 Hz,
100 Hz, 120 Hz,
140 Hz, 160 Hz,
OFF (
LPF: OFF (
80 Hz, 100 Hz,
120 Hz, 140 Hz,
160 Hz
Purpose
To output audio signals to the rear speakers
(amplifier).
To output audio signals to the subwoofer.
)
Purpose
), To select the equalizer curve; customize the
equalizer curve.When setting [Custom], selects
the equalizer settings: [Low], [Mid], [High].
To adjust the volume level of the subwoofer.
(Available only when [Rear/Sub Out] is set to
[Subwoofer].)
To adjust the sound balance between left and
right speakers.
To adjust the sound balance between front and
rear speakers.
To select the cut-off frequency of the front/rear
speakers.
)
To select the cut-off frequency of the subwoofer.
),
(Available only when [Rear/Sub Out] is set to
[Subwoofer].)
EN
19
-EN