Playing A Bluetooth Device; Searching And Playing Tracks - Alpine IVE-W560BT Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To stop playback
Press and hold OFF for 1 second.
To remove the device
Stop playback, then disconnect.
Do not disconnect during playback, as data in the device may be
damaged.
Caution for iPhone
When you connect an iPhone via USB, telephone volume is
controlled by the iPhone itself. In order to avoid sudden loud sound
after a call, do not increase the volume on the unit during a call.
About resume mode
When the iPod currently playing is connected to the dock connector,
the mode of this unit changes to resume mode and playback starts
in the mode set by the iPod.
In resume mode, repeat/shuffle play are not available.

Playing a BLUETOOTH Device

You can play contents on a connected device that supports
BLUETOOTH A2DP (Advanced Audio Distribution Profile).
1
Make BLUETOOTH connection with the audio device
(page 11).
2
Reduce the volume on this unit.
3
Press HOME, then touch [BT Audio].
4
Operate the audio device to start playback.
5
Adjust the volume on this unit.
Playback controls
If the BLUETOOTH device supports AVRCP (Audio Video Remote
Control Profile), you can control playback via this unit in the same
way as disc playback.
To match the volume level of the BLUETOOTH
device to other sources
You can reduce the volume level differences between this unit and
the BLUETOOTH device.
.
During playback, touch
Select a level from –10 to +15.

Searching and Playing Tracks

Using repeat play and shuffle play
1
During playback, touch
repeatedly until the desired option appears.
Repeat or shuffle play starts.
Available play modes differ depending on the selected sound
source.
Note
Repeat play and shuffle play are not available for version 2.0 VCD
with PBC function.
Using direct search play
1
During disc or USB playback, press the number buttons
on the remote control to enter an item (track, chapter,
etc.) number, then press ENTER. Playback starts from
the beginning of the selected point.
Note
During VCD playback, this function is available only when playing a
VCD without PBC functions.
Searching for a file from the list screen
1
During disc or USB playback, touch
from the currently played item appears.
Furthermore, touch
or
,
video/photo).
2
Touch the desired item.
Playback starts.
(repeat) or
(shuffle)
The list screen
to list up by the file type (audio/
15
-EN
EN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ive-w560bt-r

Table des Matières