Settings; General Settings - Alpine IVE-W560BT Mode D'emploi

SETTINGS

Select [Settings] in the HOME menu when you need to change the
settings of the unit.
" " in the table below indicates the default setting.
1
Press HOME, then touch [Settings].
2
Touch one of the setup category icons.
: General Settings (page 18)
: Sound Settings (page 19)
: Screen Settings (page 20)
: Visual Settings (page 20)
3
Touch / to select the desired item.
To return to the previous display, touch
To switch from the HOME screen to the playback
screen, touch .

General Settings

Language
Unit status: Any status
Option Purpose
To select the display language.
English ( ),
Français, Deutsch
(IVE-560BT)
Italiano, Русский
(IVE-560BT-R)
Time Format
Unit status: Any status
Option Purpose
12-hour, To change the time format.
24-hour ( )
Clock Time
Unit status: Any status
Option Purpose
To activate the CT function.
OFF ( ), ON
Clock Adjust
Unit status: Any status
Option Purpose
– To set the clock.
(Available only when [Clock Time] is set to [OFF].)
Beep
Unit status: Any status
Option Purpose
To activate the operation sound.
OFF, ON ( )
18
-EN
.
Touch Panel Adjust
Unit status: Any status
Option Purpose
– To adjust the touch panel calibration if the
touching position does not correspond with the
proper item.
Dimmer
Unit status: Any status
Option Purpose
OFF To deactivate the dimmer.
To dim the display automatically when you turn
Auto ( )
lights on. (Available only when the illumination
control lead is connected.)
ON To dim the display.
Dimmer Level
Unit status: Any status
Option Purpose
(–5 - +5) To select the brightness level when the dimmer
is activated.
: 0
Output Colour System
Unit status: No source selected
Option Purpose
To change the colour system according to the
NTSC, PAL ( )
connected monitor. (SECAM is not supported.)
Camera Input
Unit status: Any status
Option Purpose
OFF To deactivate the input.
To display the picture from the rear view camera.
Normal ( )
Reverse To flip the picture from the rear view camera
horizontally.