Emptying The Tub; Cleaning And Maintenance; Procedure To Follow If The Appliance Is Not Going To Be Used For Some Time; What To Do In The Event Of A Breakdown - Lotus F13-74ET Instructions Pour L'installation Et L'emploi

GB IE

EMPTYING THE TUB

The user must use the tub supplied for the purpose with the appliance.It is advisable to filter the oil daily when frying is
finished and to change it whenever necessary.
Turn the oil drainage tap inside the opening into a vertical position.
Pay particular attention if the oil is hot.
Important! Pay attention to the distance between the appliance and the corners of the support.

CLEANING AND MAINTENANCE

Attention! During cleaning, do not wash the external parts of the appliance with direct sprays of water or with
high pressure.
After every use, clean the appliance thoroughly. Daily cleaning after switching off the appliance ensures the perfect
functioning and long life of the appliance.
Before starting to clean the appliance, disconnect the power supply. The parts in steel must be washed with hot water
and neutral detergent, then rinsed thoroughly in order to eliminate all traces of detergent; after which, dried with a dry
cloth. Do not use abrasive or corrosive detergents.
To make cleaning easier, the elements may be turned by 90° in an anticlockwise direction.
After cleaning, turn the elements back correctly. There is a microswitch which shows the correct contact.
PROCEDURE TO FOLLOW IF THE APPLIANCE IS NOT GOING
TO BE USED FOR SOME TIME
Clean and dry the appliance carefully according to the instructions. Disconnect the power supply.

WHAT TO DO IN THE EVENT OF A BREAKDOWN

In the event of breakdown, turn off the appliance, disconnect the power supply by using the device situated above the
appliance and notify the after sales service.

MAINTENANCE (ONLY FOR QUALIFIED PERSONNEL)

Any kind of maintenance must only be done by qualified personnel. Before carrying out maintenance,remove the plug
or switch off the switch above the appliance.
19