Trouble Shooting - Grizzly ERT 450/8 Notice D'utilisation Originale

Trouble shooting

Problem
Trimmer vi-
brates
Trimmer does
not start
Poor cutting
performance
Possible cause
Spool is dirty
Spool is defective
No mains power
ON / OFF switch defective
Worn carbon brushes
Motor defective
Line spool does not have suf-
ficient line
Line has not been conducted
out of the spool or only on one
side
Remedy
Clean spool (see "Cleaning and
maintenance")
Exchange spool (see "Cleaning and
maintenance")
Check cable, line, plug; repair by
qualified electrician
Repair by After-Sales Service
Lengthen cutting line
(see "Operation")
or exchange spool
(see "Cleaning and maintenance")
Remove spool and lace line through
opening outwards and return spool.
UK
115