A) Screen 3,5" LCD monitor.
B) Microphone.
C) Loudspeaker.
D)
Pair of push-buttons.
1) When the monitor is ON, the push-but-
tons can be used to adjust the brightness.
2) When the monitor is OFF, the push-but-
tons can be used to select the tune for calls
from a speech unit only. To programme the
tune: hold 1 of the 2 push-buttons down for
at least 2 seconds, and press the push-but-
tons again repeatedly to select the desired
tune.
E)
Pair of push-buttons
1) In conversation with the "I" push-button
pressed, press the "E" push-buttons to
increase or decrease the volume of the
internal audio.
2) In rest position they adjust the chime
volume: keep pressed for at least 2
seconds one of the two "E" push-buttons,
press repeatedly the push-buttons to incre-
ase or decrease the chime volume. The
"E" push-buttons adjust the chime volume
even during the immission of the internal
or external call sound. Once the sound
emission has been ended, they adjust the
contrast while the screen is switched on.
F) Push-button
liary service if connected (e.g. stair lights).
G) Push-button
and terminate also the conversation in
progress.
H) Pushbutton
tch-on of the monitor press the pushbutton
once to activate the audio. Pressing it once
GB
for activating 1st auxi-
: for door lock release
after the call and/or swi-
again the conversation terminates. The red
LED remains lit for the whole conversation
dwell.
I) Pushbutton
switch-on of the monitor, hold the
push-button down for conversation with
the speech unit.
L)
Door open signal: if the green
LED lights up, this indicates that the door
is open (the function is optional according
to the type of installation).
M)
Call disabled signal:
LED lights up, this indicates that the call is
disabled (see point "E").
N) Push-buttons: for activation of auxiliary
services or intercommunicating calls (in
function of the programming).
NOTES FOR USER:
- Do not open or tamper with the set.
- In case of failure, modification or main-
tenance of the units (power supply, etc.)
contact only specialized technicians.
- Maximum operating temperature: 40°
- Do not expose the appliance to dripping,
sprinklings of water and do not put any
object filled with water on it. Do not obstruct
the ventilation openings.
- Warning: to avoid hurting oneself, this appli-
ance must be fixed to the wall according to
the installation instructions.
: after the call and/or
if the red
5