sylvac Fowler Mark VI Mode D'emploi page 9

........ continuation
MODE
MODE
MODE
MODE
Note :
It is also possible to display the tolerance limits when the instrument is operating in MIN, MAX or DELTA (TIR) mode.
- If no tolerance limit has been defined by the user, the instrument will display the tolerance limit indicators
will not turn on the indicator lights (red - green - yellow)
.......Inputting a multiplication factor other than 1.0000
SET
.......Automatic switch-off mode
SET
MAn = de-activated, Auto = active (after 20 min.)
.......Keypad lock
SET
Only the favourite key
(to unlock the keypad, press
Next digit 0...9
SET
remains active
9
save Preset
MODE
for 5 sec)
SET
OK
E
, but