Setting The Co Alarm Limit - Wohler CDL 110 Instructions De Service

7.4 Setting the CO
alarm limit
Fig. 9: Setting the alarm limit
NOTE!
Set up the alarm value within the specification range, so that accuracy is ensured.
Readings that are out of specification are only for reference and not suitable to be used
as alarm limits.
In the P 1.3 mode the current set value will be
2
blinking and the flat icon will appear (see Abb. 9).
Press ▲ to increase or MIN/MAX▼ to de-
•
crease the value.
Each press tunes 100 ppm.
NOTE!
The alarm range is from 1000 ppm to 5000 ppm.
Press SET to confirm.
Setup
EN
41