Getting Started; Adjusting The Freewheel Brake - Wohler H 420 Mode D'emploi

4

Getting started

4.1 Adjusting the
freewheel brake
Fig. 23: Star grip screw for adjusting the
freewheel brake
Increasing the braking action
Decreasing the braking action
The freewheel brake allows to wind or unwind the
GRP rod in a controlled way. This way, the rod
cannot run out of the viper.
The freewheel brake is adjusted with the star grip
screw on the left side of the screen.
NOTE!
The freewheel brake is adjusted at the plant and
normally it is not necessary to change the setting.
•
Turn the star grip screw clockwise.
The rod will not run out of the cage.
•
Turn the star grip screw anti-clockwise.
You can easily pull the rod out of the basket.
Getting started
25
EN