Setting Up The Instrument; Seting Up The Micro Sd Card - Wohler CFM 600 Mode D'emploi

3

Setting up the instrument

3.1

Seting up the Micro SD card

Fig. 21: txt-file „names" of the Micro SD
card on the computer.
Fig. 22: Example: Assigning customer
names and room names

Remove the Micro SD card of the monitor (cp.
fig. 10).

Insert the Micro SD card into the Micro SD
adapter or into the USB adapter.
(Both included in the scope of delivery) .
Now you can read out the data of the Micro SD
card on your computer.

Open the file "names.txt".
If necessary, you can overwrite the customers and
the projects with the names of your customers,
projects or room names.
Note !
It is easier to create the customer files in the PC
software Wöhler CFM 600 and transfer it on the
card (Article 997).
Remove the SD Micro Card from the adapter and
insert it back into the SD card slot of the monitor.
(cp. Fig. 10)
NOTE!
Take care that the device is switched off, when
you insert the SD Micro Card into the monitor.
Setting up the instrument
EN
31