Switching The Alarm Beep On And Off; Temperature Scale - Wohler CDL 110 Instructions De Service

Setup
7.5 Switching the
alarm beep on
and off
7.6 Temperature
scale
Fig. 10: Display P2.0-mode
Fig. 11: Selecting the temperature
42
In the P 1.4 mode the alarm beep can be switched
on and off.
• Select ON to activate the alarm beep.
• Select OFF to deactivate the alarm beep.
Change between ON and OFF with the ▲/▼-
•
keys
Press SET to save the setting.
•
Select the temperature unit in P2.0 mode. Go
from normal mode to 2.0 mode by doing the fol-
lowing steps:
Press and hold SET in normal mode for three
•
seconds to enter P1.0 mode.
Press ▲ in P1.0 mode to enter P2.0 mode
•
(see Fig. 10).
Press SET to enter P2.1 mode for setting the
•
actual temperature unit with the actual unit °C
or °F blinking (Fig. 11)
Press ▲ or MIN/MAX▼ key to change from
•
°C to °F.
Press SET to save the settings or press ESC
•
to return to P2.0 mode without saving.