Table des Matières
Publicité
Mode 6: 5 Channels
16 bit intensity, Strobe, Fan control and fixture settings.
In addition to Intensity, Strobe and Fan parameters, the Control parameter allows adjusting some settings from the DMX controller.
Commands sent to the ALS-150 override any settings entered directly in the device's local menus.
Available Control channel settings:
-
RDM On/Off
-
DIMMING Setting
-
DIMMING Modes: Standard or Soft
-
DIMMING Curves: Quadrature, Linear or Theater
Channel
Parameter
1
Intensity
2
(16 bits)
3
Strobe
4
Fan
5
Control
User Manual - Page 10
Issue 1.1
DMX Value
Dimmer
0 -255
Dimmer – fine
0 - 9
Open
10 - 57
Snap Slow to Fast
58 - 59
Open
60 - 108
Open Pulse Slow to Fast
109 -110
Open
111 - 159
Close Pulse Slow to Fast
160 - 161
Open
162 - 255
Random
0 - 255
Fan
0 - 9
No Function
10 - 45
RDM On
46 – 80
RDM Off
81 - 115
Standard Dimming mode
116 - 150
Soft Dimming mode
151 - 185
Quad Curve
186 - 220
Linear Curve
221 - 255
Theater Curve
www.adblighting.com
Function
In order to control the luminaire's fan via DMX, Fan
has to be set in FAN MODE Dmx (Menu 2 FAN
Setting).
'FAN MODE Dmx "is displayed only if DMX Modes 5
or 6 are selected. When switching from mode 5 or 6
back to another mode, the fan mode changes
automatically for SILENT.
Publicité
Table des Matières
