Marmitek 20095 Guide Utilisateur page 7

VCR
SAT
8. Locate the small IR LED's on the IR sensors of the equipment connected. The IR emitters
have a piece of adhesive tape on the back. Remove the protective label and press the
emitter lightly to the front of your equipment. You may have to makesome adjustments
to find the right location.
9. Select a channel using the Channel Selector slide switch [9], e.g. C.
10. Connect the large power adapter (12V) to the TV Anywhere transmitter [6].
Attention: The power adapters for the transmitter and receiver are different!
11. Switch on the unit with the ON/OFF switch [7].
12. Make sure the TV Anywhere transmitter is placed some distance away from other items.
Do not place the transmitter on top of your audio and/or video equipment. Direct the flat
2.4 GHz antenna [K] at the receiver.
TV ANYWHERE
OUT
IN
D
OUT
IN
RADIO TV
TV
SCART
C
A 2 3
DVD
I
5
4
G
F
7