Marmitek 20095 Guide Utilisateur page 20

3. To operate the TV Anywhere with the remote provided, it has to be set to TV Anywhere
mode. To set it to the TV Anywhere mode, press the [CBL] button.
4. Using a wireless baby monitor, wireless headphones or wireless speakers that use the
same frequency as the infrared extender of your TV Anywhere (433 MHz), will
significantly decrease the range.
5. Read paragraph 7.7 on how to set the handset code
My TV Anywhere cannot find any channels
1. You have chosen the wrong TV system. Read paragraph 6.4.
2. Check your antenna connection.
I do not get a blue screen on my TV
The TV Anywhere receiver is attached to the Scart input on your TV. This means that the TV
always has to be set to "external channel" or "audio/video" channel. The instruction manual
for your TV will tell you how to do this.
I've programmed the channels on the TV Anywhere but I can't switch
channels
1. Read "The remote won't work with the TV Anywhere ".
2. The TV Anywhere has stored the channels on the transmitter. You therefore cannot
switch channels on the TV; you have to do this on the TV Anywhere transmitter itself.
The TV always has to be set to the "external" or "audio/video" channel. By setting the
remote to TV Anywhere mode (using the [CBL] button), you can change the channels on
the TV Anywhere transmitter. When doing so, it is important to point it at the TV
Anywhere receiver.
I can hear the sound of the first TV on the second TV via the TV Anywhere.
You have probably connected the cable with the Scart adapter TRANSMITTER to the
audio/video OUT of the TV Anywhere transmitter. You need to use OUTPUT with the Scart
adapter RECEIVER and INPUT with the Scart adapter TRANSMITTER.
20 MARMITEK