Re-Arranging The Tv Channels - Marmitek 20095 Guide Utilisateur

SCANNING
Please wait
vhf
7. When the SCAN procedure is finished, the TV Anywhere will show how many TV
channels were found. The screen below will be displayed for 4 seconds.
SCAN COMPLETE
FOUND xx CHANNELS
8. After the "Scan complete" screen has disappeared, you can "zap" through the TV
channels by pressing the PROG+ and PROG- buttons or by using the numeric keys on the
remote control.
☺
Because the tuner will also cover weak channels, there is a chance that the list will
contain some "empty" channels. If you see any of these channels, you can delete them
by pressing the CHANNEL DETELE button on your remote control. If you press this
button, the word "DELETED" will be displayed on the screen. 4 seconds later the TV
channel will be deleted from the list.

6.1. Re-arranging the TV channels

The TV AnyWhere lets you re-arrange the order of the TV channels, so that you can create
your favorite list.
1. Move up or down the TV channels using PROG+ and PROG- and look for the TV channel
you want to move to position 1 on the list.
2. When you have found the TV channel of your choice, press COPY. The screen now reads
"COPIED. READY TO MOVE".
3. Now move to position 1. You can do this by using PROG+ and PROG- or by pressing 1 on
your remote control.
4. When you have arrived at position 1, press PASTE. The channel has now been moved
from its original position to position 1 on the list. The screens now reads "ADDED TO
PROGRAM LIST".
☺
The original TV channel on position 1 is automatically moved to position 2, the channel
on position 2 is moved to 3, etc. This means that the complete list is automatically being
moved down and that no channels are lost.
10
uhf
MARMITEK