Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7.3.1.
7.3.2.
7.3.3.
7.3.4.
8.
1. The TV Anywhere system
The TV Anywhere system includes a transmitter and a receiver for antenna signals. With the
TV Anywhere system, you can transmit audio and video signals throughout your house to a
remote TV or VCR, without additional coaxial cables. The TV Anywhere transmitter can be
connected directly to your antenna wall socket. The transmitter is equipped with a built-in TV
Tuner. This tuner can be programmed and operated remotely with the remote control
supplied. This tuner converts the antenna signal into an audio/video signal. This A/V signal is
transmitted by the unit on a 2.4 GHz frequency. The receiver is connected to the Scart input
on your remote Television.
Multisource
Additional video equipment can be connected to the transmitter as well (e.g. VCR, DVD
player or satellite receiver). The source required can be selected on the remote control supplied,
even from another room. The TV Anywhere has a built-in IR (infrared) extender to be used with
your original remotes. You can use the supplied 6in1 universal remote locally (for your
connected TV) as well as for various other equipment (e.g. DVD, VCR, etc.). connected to the
transmitter. The remote control supplied is also used to select channels on the TV Anywhere.
2. TV AnywhereTransmitter
To operate the transmitter, please use the following items supplied:
•
TV Anywhere Transmitter
•
Power supply 12V (large)
•
RCA/RCA cable
•
Scart adapter indicated "transmitter"
•
Infrared extender with 3 IR LED's
•
Coaxial splitter
•
Coaxial cable
2.1 Control elements, transmitter
1.
433MHz antenna: Receives the RF signals from the IR extender in the TV Anywhere
receiver. This allows you to operate your equipment (VCR, DVD player, etc.) with your
4
MARMITEK
Publicité
Chapitres
Table des Matières
