Health Hazard By Dust; Intended Use; Saw Blades; Technical Data - Festool TS 75 EQ Notice D'utilisation D'origine

English
3.6

Health hazard by dust

WARNING! various dust created by pow­
er sanding, sawing, grinding, drilling and
other construction activities contains chemicals
known (to the State of California) to cause can­
cer, birth defects or other reproductive harm.
Some examples of these chemicals are:
– lead from lead-based paints,
– crystalline silica from bricks and cement
and other masonry products, and
– arsenic and chromium from chemically
treated lumber.
The risk from these expo­
sures varies, depending on
how often you do this type of
work. To reduce your expo­
sure to these chemicals:
work in a well ventilated
area, and work with approved safety equipment,
such as dust masks that are specially designed
to filter out microscopic particles. Wash hands
after handling.
WARNING
TO REDUCE THE RISK OF INJURY, USER
MUST READ INSTRUCTION MANUAL.
4

Intended use

Plunge-cut saws are designed for sawing wood,
materials similar to wood, gypsum and cement-
bonded fibre materials and plastics.
When fitted with the special saw blades offered
by Festool, the machines can also be used for
sawing unhardened ferrous metal and non-fer­
rous metal.
Materials containing asbestos must NOT be
processed.
Do not use cutting or abrasive wheels.
This power tool may only be used by experts or
instructed persons.
Festool electric power tools must only be in­
stalled on work tables provided by Festool for
this purpose. If the tool is installed in another,
or self-made, work table, it can become unsta­
ble and result in serious accidents.
The user is liable for improper or non-in­
tended use.
4.1

Saw blades

Only use saw blades with the following dimen­
sions:
– Saw blades according to EN 847-1
– Saw blade diameter 8-1/4" (210 mm)
8
– Cutting width 3/32" to 7/64" (2.4 - 2.6 mm)
– Locating bore 1-3/16" (30 mm)
– Standard blade thickness Max. 5/64"
(1.8 mm)
– Suitable for speeds of up to 5000 min
Festool saw blades comply with EN 847-1.
Only saw materials for which the saw blade in
question has been designed.
5

Technical data

Circular saw
Power consumption
No load speed
Angele of cut
Cutting depth at 90°
Cutting depth at 45°
Saw blade diameter
Saw blade hole diameter
Weight
6

Functional description

1.1
1.2
1.3
1.4
1.5
1.6
[1.1]
Protective cover
[1.2] Cutting depth scale
[1.3] Cutting depth end stop
[1.4]
Setscrew for angle adjustment
[1.5] Hexagon socket wrench
[1.6]
Saw table
[1.7] Switching on and unlocking block
[1.8]
On/Off switch
[1.9] Guide jaws
-1
TS 75 EQ
13 A
1350 - 4400 min
-1
0 - 45°
2-15/16" (75 mm)
2-1/8" (56 mm)
8-1/4" (210 mm)
1-3/16" (30 mm)
13.6 lbs (6.2 kg)
1.7
1.8
1.9