Serial Numbers; Cleaning And Maintenance - Peg-Perego aria Notice D'emploi

the front bar-child tray; this could be dangerous.
16 REPLACING THE BASKET: If it is necessary to replace
the basket, fasten the front of the new basket to
the hooks (fig_a) and close the buttons on the back
(fig_b).
17 REMOVING THE WHEELS: The wheels on the stroller
are removable. To remove the front wheels, set them
to swivel, press the levers (fig_a) and at the same time
push the wheel until it comes off (fig_b).
18 To remove the rear wheels, press the button (fig_a)
and at the same time push the wheels down until
they come off (fig_b).
19 CLOSING: before closing the stoller, close the hood
if it is fitted. To close the stroller, lift the two levers
on the handle (fig_a) and rotate the handle forwards
until it clicks into position (fig_b).
20 Push the backrest and the hood towards the stroller,
while lowering the handlebar into its housing (fig_a).
Check to make sure that the stroller is fastened
securely with the safety clip (fig_b). The folded-up
stroller will stand upright by itself and it is possible to
carry it thanks to the practical handle (fig_c).
21 REMOVABLE LINING: To remove the lining from the
stroller, first of all remove the hood, then remove the
little cover on the side by pressing on it (fig_a). Push
the pin upwards and then outwards (fig_b). Slip the
pin out of the hole in the sack (fig_c). Repeat on the
other side.
22 To detach the sack from the seat, remove the leg
divider from under the seat (fig_a), and unbutton
(fig_b). Unscrew the safety belt from both sides
(fig_c) and slip the sack off the stroller (fig_d).
GANCIOMATIC SYSTEM
Ganciomatic is the practical, fast system for attaching
the Primo Viaggio car seat to the stroller. The car seat
is fitted with the Ganciomatic System, and is sold
separately.
23 STROLLER GANCIOMATIC FASTENERS: To raise the
Ganciomatic fasteners on the stroller, pull the sack
up in the seat corners and lift the two fasteners. They
will automatically move outwards (fig_a). To lower the
Ganciomatic fasteners, push them inwards and then
down (fig_b).
24 STROLLER + CAR SEAT: To fasten the car seat to the
stroller: set the brake on the stroller, remove the
hood, completely lower the backrest and raise the
Ganciomatic fasteners. Place the car seat, facing the
adult, on the stroller and push down until it clicks into
place. Do not remove the front bar from the stroller
when attaching the car seat. See the car seat's user
manual for instructions on how to detach it from the
stroller.
ACCESSORY
25 BORSA CAMBIO. Diaper-Changing Bag with pad for
changing the baby. Attaches to the stroller.

SERIAL NUMBERS

26 ARIA carries information on its date of manufacture
under the seat.
_ Product name, date of manufacture and serial number
of the product.
This information is essential in the event of any
complaints.

CLEANING AND MAINTENANCE

PRODUCT MAINTENANCE: protect from the weather:
water, rain, or snow; prolonged and continuous
exposure to bright sunlight may give rise to colour
changes of various different materials; store this
product in a dry place.
CLEANING THE CHASSIS: periodically clean all plastic
parts with a damp cloth. Do not use solvent or
similar cleaning products; keep all metal parts dry to
prevent rusting; keep moving parts clean (adjustment
mechanisms, locking mechanisms, wheels, ...) and
free of dust and sand and, if necessary, lubricate with
light machine oil.
CLEANING THE RAIN CANOPY: wash with a sponge
and soapy water; do not use detergents.
CLEANING FABRIC PARTS: brush fabric parts to
remove dust and wash by hand at a maximum
temperature of 30°C; do not wring; do not use
chlorine bleach, do not iron; do not dry clean; do not
apply solvent-based stain removers and do not dry in
a tumble dryer.
PEG-PÉREGO S.p.A.
Peg-Pérego S.p.A. is an ISO 9001
certified company. This certification is a
guarantee for customers and consumers
of the transparency and trustworthiness
of the company's procedures and
working methods.
Peg Pérego can make changes at any time to the
models described in this publication for technical or
commercial reasons.
Peg Pérego is at the disposal of its customers and
consumers to ensure that all their demands and
queries are fully satisfied. It is a key part of our policy
to ensure we are always aware of our customers'
views and requirements. We would therefore be very
grateful if, after using a Peg Pérego product, you
take the time to fill in our CUSTOMER SATISFACTION
QUESTIONNAIRE, making a note of any comments
or suggestions you might have. You can find the
questionnaire on the Peg Pérego website: www.
pegperego.com
PEG-PÉREGO AFTER-SALES SERVICE
If any parts of your Peg Pérego product should be
accidentally mislaid or damaged, use exclusively
genuine original Peg Pérego replacements. For any
repairs, replacements, product information, and
orders for genuine original replacement parts and
accessories, please contact Peg Perego After Sales
Service indicating the product serial number, if any.
tel. 0039/039/60.88.213
e-mail assistenza@pegperego.it
website www.pegperego.com
- 15 -
fax 0039/039/33.09.992