Installation; Installation Clearances - Nussbaum WA 780 Manuel D'instructions

WARNING
This operation must be carried out very
carefully to prevent the cabinet from
tipping over and/or being damaged.
CAUTION
Handle with care: violent vibrations may
damage the equipment.
CAUTION
Keep the original packaging materials
for future shipping.
WARNING
Before moving the equipment, first un-
plug the power supply cable from the
socket.

INSTALLATION

INSTALLATION CLEARANCES

WARNING
Choose the place of installation in com-
pliance with local regulations on occupa-
tional safety.
CAUTION
If the aligner is to be installed outdoors,
it must be properly protected by a can-
User Manual WA 780 - Cura S 780
opy roof or other protection device to
avoid contact with water.
Install the aligner at the required work
position; make sure there are at least 25
cm between the rear part of the machine
and the nearest wall.
The radio system between the measuring
sensors and the central unit has a range of
approximately 15 m. To avoid signal loss,
radio equipment should be kept away
from large metal objects. The technical
service manual provides instructions for
selecting an interference-free channel to
optimise communication.
Note
Excessive ambient light levels or direct
exposure to sunlight may compromise
the operation of the measuring sensors,
preventing images from being clearly dis-
played on the screen.
CAUTION
Make sure that there are no permanent
magnets, electromagnets or sources of
heat in the vicinity of the machine as
these could cause irreparable damage
to the programme disk and the Personal
Computer.
WARNING
Take the utmost care when unpacking,
assembling, lifting and installing the
machine.
Failure to comply with these instructions
may damage the machine and risk the
operator's safety.
GB
65