Nussbaum WA 780 Manuel D'instructions page 77

tioned exclusively on the vehicle wheel
indicated on the adhesive data plate af-
fixed to the measuring sensor.
Fig.17
1) Keypad
2) Connector for connecting the emergency
recharging cable
3) Battery compartment
4) Longitudinal CCD goniometer
5) Transverse CCD goniometer
6) Clamp pin insertion hole
7) Measuring sensor release button
8) Tightening knob
• Description measuring sensor keypad
functions and keys (fig. 18)
User Manual WA 780 - Cura S 780
Symbol
18
Description
"Power" key
Switches the meas-
uring sensor on and
off (the LED above
the key indicates
the working status).
"Compensation"
("ROC") Key
Starts the compen-
sation procedure
(the LED above the
key indicates the
ROC procedure ex-
ecution status).
"Level" indicator
LED
The battery charge
status is shown by
the two LEDs on the
connector connect-
ing the emergency/
charge cable (2, fig.
17).
(Green LED on,
charging in pro-
gress; orange LED
on, charging error;
both LEDs off and
head working, bat-
tery charged; both
LEDs off and head
not working, battery
faulty or absent)
77
GB