Technical Data - Nussbaum WA 780 Manuel D'instructions

user using the "Insert", "Modify", "De-
lete" functions.
• Vehicles from the main and personal-
ised databanks displayed in a single list
for easier consultation.
• Handling of reference data for adjust-
ments based on vehicle chassis height
(for vehicles which support this mode).
• Possibility of saving the job records of
operations performed on vehicles.
("Customer databank").
• Two runout compensation (ROC) pro-
grammes:
"3-point ROC":
independent compensation for each in-
dividual wheel;
possibility of simultaneous execution on
several wheels (except for the two wheels
on the same side);
"Push-mode ROC"
simultaneous compensation on the four
wheels by pushing the vehicle for a dis-
tance corresponding to a wheel rotation
of approximately 90°;
applicable to 4WD vehicles.
• The adjustment windows, with different
layouts of the graphic and numeric parts.
• Help function with animated graphic
display of adjustment operations.
• Calculation and simplified adjustment
of the toe curve.
• Other programs available:
adjustment of the vehicle with wheels
raised (jack & hold);
calculation and complete adjustment of
the toe curve (optional);
calculation of databank tolerances and
storage of latest generation Mercedes
camber and caster values according to
the manufacturer's procedure (optional);
electronic acquisition of chassis height
values, very useful when adjusting French
cars (optional);
calculation and adjustment of the steer-
ing rack box height;
adjustment of the steering wheel posi-
tion;
User Manual WA 780 - Cura S 780
• Calibration programme.
• Service and diagnosis programmes.
• Various types of self-centering clamps
are available for the requirements of dif-
ferent wheels.

TECHNICAL DATA

• Measurement fields (in centesimal de-
grees):
Toe ..........................................................±10.00°
Camber or inclination . . . . . . . . . . . . . . . . . . ± 10.00°
Caster) ...................................................± 30.00°
King pin angle .......................................± 30.00°
Set -back)................................................± 10.00°
Thrust angle ...........................................± 10.00°
Steering angle .......................................± 10.00°
Maximum steering angle (manual activation of
the reading performed on graduated scales) .....
....................................................................± 99.99°
• Maximum resolution: ........... ± 0.01° (0.1 mm)
• Power supply (standard): 110/230V AC - 50/60 Hz
• Absorbed power: ........................... 500 W
• Power supply socket protection
(mains fuses).............................: 3.15 AT - 250 V
• Radio measuring sensor batteries: Recharge-
able 1.2V AA(2000-3000) mA/h (NiMH) (4 per
measuring sensor)
• Max. sizes:
- Central unit............................600x600x1550
- Measuring sensors........895x170x310 mm
• Net weight (central unit with 4 measuring
sensors):
- Central unitl ............................................ 65 Kg
- Measuring sensors................................18.0 Kg
• Electric and electronic components weight ......
...........................................................................20kg
• Noise level in working conditions: .......................
................................................................................< 70 db(A)
GB
73