Scrapping; Environmental Information - Nussbaum WA 780 Manuel D'instructions

SCRAPPING

If the machine is to be scrapped, remove
all electrical, electronic, plastic and metal
components
Then dispose of them separately as pre-
scribed by law. See fig. 39.
ENVIRONMENTAL
INFORMATION
The disposal procedure described below
must only applies to machines with the
symbol of the waste bin with a bar across
it on their data plates.
This product may contain substances that
can be hazardous to the environment and
to human health if it is not disposed of
properly.
114
We are therefore providing you with the
information below in order to prevent these
substances from being released into the
environment, and to improve the use of
natural resources.
Electrical and electronic equipment must
never be disposed of in the usual municipal
waste but must be separately collected for
their proper treatment.
The crossed-out bin symbol, placed on
the product and on this page, reminds the
user that the product must be disposed of
properly at the end of its life.
Thus, the hazardous consequences that
non-specific treatments of the substances
contained in these products, or improper
use of parts of them, may have on the envi-
ronment or on human health are prevented.
Furthermore, this helps to recover, recycle
and reuse many of the materials contained
in these products.
Electrical and electronic manufacturers and
distributors set up proper collection and
treatment systems for these products for
this purpose.
At the end of the product's working life,
contact your supplier for information about
39
disposal procedures.
When you purchase this product, your
supplier will also inform you that you may
return another worn-out appliance to him
free of charge, provided it is of the same
type and has provided the same functions
as the product just purchased.
Any disposal of the product performed in
a different way from that described above
will be liable to the penalties provided for
by the national regulations in force in the
country where the product is disposed of.
Further measures for environmental pro-
tection are recommended: recycling of
the internal and external packaging of the
product and proper disposal of used bat-
User Manual WA 780 - Cura S 780