Knick Stratos Pro A2 CC Série Guide Rapide page 6

Display in Measuring Mode
Conductivity 2
Conductivity 1
6
approx. 2 s
Calculated pH
The MAIN DISPLAY is the display which
is shown in measuring mode. To call
the measuring mode from any other
mode, hold the meas key depressed
for at least 2 sec.
meas key
enter key
By pressing meas briefl y you can step
through further displays such as tag
number (TAG) or fl ow (L/h).
These displays are turquoise. After
60 sec they switch back to the main
display.
Press enter to select a display as
MAIN DISPLAY.
The secondary display shows
"MAIN DISPLAY – NO".
Use the UP / DOWN arrows to select
"MAIN DISPLAY – YES"
and confi rm by pressing enter.
The display color changes to
white. This display is now shown in
measuring mode.
Example:
Display of conductivity 1 and 2
and calculated pH value.