Abus Secvest FUSG50101 Instructions D'installation Et D'utilisation page 36

Technical data
Voltage monitoring
Operating frequency
Wireless power output
Transmission and
reception range
Wireless identification
Standards for intrusion
and panic button devices
EU Directives
General
36 | EN
During operation the voltage provided by the batteries is monitored.
If the voltage is below the lower threshold of 4.5 V, a fault report is
sent to the alarm control panel and the user is informed.
868.6625 MHz narrow band
max. 10 mW
max. 500 m range outdoors
Wireless components, differentiation
24
16,777,214 (2 -2) different IDs
in compliance according to:
EN 50131-1:2006+A1:2009+ A2:2017
EN 50131-4:2010-02
EN 50131-5-3:2017
(detection of interfering sources excluded)
EN 50131-6:2017
Security level 2 if installed correctly together with Secvest FUAA50xxx.
PD6662:2010
Certification authority: Telefication
RED
EMC
RoHS
WEEE
ErP
Low voltage
General safety
This product must be installed by a qualified service engineer.
2014/53/EU
2014/30/EU
2011/65/EU
2012/19/EU
2009/125/EU
2014/35/EU
2001/95/EG