Maintenance; Changing The Batteries/Fuse; Fitting The Shockproof Case; Cleaning - Chauvin Arnoux C.A 6511 Mode D'emploi

CHANGING THE BATTERIES/FUSE

Check that no terminals are connected and that the switch is in the OFF position before
opening the instrument. For safety, the instrument can only be opened if the leads are
disconnected from the terminals. Access to the fuses and the batteries is by opening the back
of the case.
Remove the shockproof case if there is one, then undo the tool release screws with a
screwdriver and remove the back of the case.
Warning : never press the yellow button when the case is open.
Tool release
screws
Fold away
stand

FITTING THE SHOCKPROOF CASE

In order not to damage the window protecting the display, it is preferable to first engage the
upper part of the instrument in the case, then to push the lower part in.

CLEANING

Clean the case of the instrument with a soft damp cloth. Use soapy water but not alcohol,
solvents or hydrocarbons.

REPAIRS-MAINTENANCE

The maintenance operations must be done with original parts, and by an approved service
department. To obtain a good quality measurement, it is preferable to recalibrate every two
years, or every year in case of intensive use.

MAINTENANCE

+
-
+
-
15
Fuse 1.6 A
4 batteries
+
+
1.5 V LR6
-
-