Wilo Stratos Notice De Montage Et De Mise En Service page 22

English
Changing the display setting from feet [ft] to meters [m]
LC display
22
Setting
Subject to technical alterations!
Press and hold in the red button at the
initial start up menu (level one) for a
period of approximately 6 seconds.
During this time there will be access to
the second menu level (menu item
display orientation) after approximately
1 second.
After another 5 seconds there will be
access to the third menu level.
The display "m ft" appears, with [ft]
flashing (factory default is [ft]).
By turning the red button the display
can be changed over to [m].
(m is flashing)
By pressing the red button the selection
is confirmed.
The display immediately returns to the
first menu display.
WILO AG 05/2007