Wilo Stratos Notice De Montage Et De Mise En Service page 18

English
LC display
18
Setting
Switch pump on/off.
Switch on pump, "ON" and the "module motor
symbol" appear in the display
Switch off pump, "OFF" appears in the display and
the "motor symbol" disappears.
Menu point
selected
Either flash
auto
Menu point
• regulator mode was selected,
• the input 0...10 V was activated
In single-pump mode the display returns to basic
setting
In the event of an error the error menu
appears before the basic setting
In double pump mode (two single pumps) the
display jumps to menu
Subject to technical alterations!
The setting can be altered by turning
the tuning button.
Setting stored.
is skipped if regulator mode was
• automatic night setback
Pump runs in standard mode
Menu point
" during autom. standard
mode or "auto
automatic night-setback
• normal standard mode,
automatic night-setback
disabled.
Menu point
any symbol.
call up one of the two settings
and store.
Display jumps to the next menu.
is skipped if:
.
.
then shows "auto
" during
does not contain
.
WILO AG 05/2007