Wilo Stratos Notice De Montage Et De Mise En Service page 17

LC display
Installation and operating instructions Wilo-Stratos
Setting
Position setting of display vertical / horizontal
The set position of the display is shown by the
flashing "ON".
By turning the tuning button the other
position can be selected.
Setting stored.
The currently set control system blinks.
By turning the tuning button other
control systems can be selected. The
new selected control system blinks.
Pressing the button stores the new
control system and switches to the next
menu.
Menu point only appears if a Stratos IF module
was inserted with input 0...10 V.
Switch input 0...10 V on/off
Activate input 0...10 V: "ON" and the "module
motor symbol" appears in the display.
The setting can be altered by turning
the tuning button.
Deactivate input 0...10 V: "OFF" appears in the
display and the "motor symbol" disappears.
Setting stored.
If the input was switched on, the menu manager
jumps to menu point .
English
17