Electrical Connection; Connector S32; Cable Connection - Balluff BTL5-S1 Série Notice D'utilisation

BTL5-S1 _ _ (B)-M _ _ _ _ -H/W(8)-S32/KA_ _/K_ _/FA_ _/F_ _
Magnetostrictive Linear Position Sensor – Rod Style
4
Installation and connection (continued)
Supporting rod made of non-magnetizable material
Fig. 4-8: Example 2, BTL installed with supporting rod
4.4

Electrical Connection

Depending on the model, the electrical connection is made
using a cable or a connector.
The connection or pin assignments for the respective
version can be found in Tab. 4-2 to Tab. 4-3.
Note the information on shielding and cable
routing on page 11.
4.4.1

Connector S32

Pin BTL5-S1_ _...-S32
1 +Clk
2 +Data
3 –Clk
4 Not used
1)
5 –Data
6 GND
7 20...28 V
8 Not used
1)
Unassigned leads that are not used can be connected to the GND on
1)
the controller side but not to the shield.
Tab. 4-2: Connection assignment BTL5...-S32
Fig. 4-9: Pin assignment of S32 (view from above on BTL), 8-pin
M16 circular plug
10 english
Magnet
(e.g. BTL-P-1028-15R)
4.4.2

Cable connection

Wire color BTL5-S1_ _...-KA_ _/K_ _/FA_ _/F_ _
YE Yellow +Clk
PK Pink –Clk
GY Gray +Data
GN Green –Data
BU Blue GND
BN Brown 20...28 V
WH White Not used
1)
Unassigned leads that are not used can be connected to the GND on
1)
the controller side but not to the shield.
Tab. 4-3: Cable assignment BTL5-...-cable