Accessories - Festool TSC 55 REB Guide D'utilisation

For service, maintenance, disposal and
transport of the battery pack, note enclosed
instructions of the battery pack!
Resharpened saw blades
The cutting depth of resharpened saw blades can
be adjusted accurately using the adjusting screw
[9-1].
Adjust the cutting depth stop [9-2] to 0 mm

(with guide rail).
Unlock the saw unit and push downwards until

it reaches the stop.
Turn in the adjusting screw [9-1] until the saw

blade touches the workpiece.
Always use accessories and consumable materials
approved by Festool. See Festool catalogue or
www.festool.com.
The power tool may become unsafe and lead to se-
rious accidents if other accessories and consum-
ables are used.
In addition to the accessories described, Festool
also provides a comprehensive range of system ac-
cessories that allow you to use your machine more
effectively and in diverse applications, e.g.:
• Parallel stop, table widener PA-TS 55
• Side-mounted cover, false joint ABSA-TS 55
• Kickback stop FS-RSP
• Parallel stop FS-PA and guide extension FS-PA-
VL
• Multifunction table MFT/3
Saw blades, other accessories
In order to saw different materials quickly and
cleanly, Festool offers saw blades for all applica-
tions that are specially designed for your Festool
portable circular saw.
Guide system
The guide rail enables you to make clean, accurate
cuts while simultaneously protecting the surface of
the workpiece from damage.
In conjunction with the extensive range of accesso-
ries, exact angled cuts, mitre cuts and fitting work
can be completed with the guide system. The option
18
9

Accessories

of attaching the guide rail securely using clamps
[10-5] ensures safer working conditions.
Adjust the guide play between the saw table and

the guide rail using the two adjustable jaws [10-
1].
10
10-2
10-1
Bed in the splinterguard [10-3] before using the
guide rail for the first time:
Set the machine speed to 6.

Place the machine at the rear end of the guide

rail together with the complete guide plate.
Switch on the machine.

9-1
9-2
10-3
10-4
10-5