Festool TSC 55 REB Guide D'utilisation page 14

3
+FS
3-1
Adjusting the cutting angle
between 0° and 45°:
Unscrew the rotary knobs [4-1].

Swivel the sawing unit to the desired cutting an-

gle [4-2].
Tighten the rotary knobs [4-1].

 Both positions (0° and 45°) are set at the factory
and can be readjusted by the after-sales service
team.
When making angled cuts, slide the viewing
window/splinterguard to the highest posi-
tion!
to undercut -1° and 47°:
Swivel the saw unit to the end position (0°/45°)

as described above.
Pull out the release button [4-3] slightly.

Pull release button [4-4] as well for -1° undercuts.

The saw unit engages in the -1°/47° position.
Tighten the rotary knobs [4-1].

14
4
0° - 45°
4-1
4-2
47°
4-3
-1°
Changing the saw blade
CAUTION
Hot and sharp tools
Risk of injury
Do not use insert tools that are blunt or defec-

tive.
Wear protective gloves.

4-1
-1°
-1° / 47°
4-4