Using The Microphone - Trevi XF 3200 PRO Mode D'emploi Et Branchement

ENGLISH

USING THE MICROPHONE

1. Connect the microphone supplied into MIC(2) jack;
2. Turn on the microphone using the switch on the handle of the microphone to the ON position;
3. Adjust the microphone input volume and the echo effect as desired by commands(10) and (4);
4. Press the PRIORITY key(12), the display shows the word "PON", if you want to give priority to the microphone voice compared
to the music played (the music is automatically lowered in volume when speaking with the microphone), press it again ( the
word "POFF" appears on the display) to return it to the normal condition;
5. Adjust the MIC DELAY using the appropriate control (15).
RECORDING
MUSIC RECORDING
This unit and 'capable of recording on USB or SD card memory the music from radio function or Aux-in (it is NOT possible to
record from the Bluetooth). The device will automatically create a folder called "Record" inside the USB memory or SD Card and
it will store all log files.
1. Turn on the unit;
2. Insert a USB memory or a SD Card into the socket (8 and 9);
3. Select the Radio function or Aux-in by MODE button(17) on the unit, or the MODE(2) key on the remote control.
4. Press RECORD button(11) on the unit to start recording, the display will show the time and signature will start.
5. Press again RECORD button(11) to stop recording. The device will automatically go into USB/SD function to immediately
playback the recorded file. After playing the unit will report on the initial function.
Note:
- The recording feature may not support some USB/SD devices, this is due to the incompatibility of some processors.
- When you turn on the "Registration" some functions of unit are inhibited, they will take their normal function when the recording
will stop.
14
XF 3200 PRO
DC 12V Input