Bluetooth Function - Trevi XF 3200 PRO Mode D'emploi Et Branchement

ENGLISH
DIRECT RECALL OF FREQUENCY
1. Use the keypad (7) on remote control to tune the desired frequency.
For example, to listen to 93.1MHz frequency type 9 3 1.
Note:
- The FM reception depends on the place where you place the unit.
- The proximity of TV sets, fluorescent lamps or other appliances may cause interference in the reception of radio programs,
in this case, move this unit.

BLUETOOTH FUNCTION

1. Turn on the machine and press the MODE(17) on unit, or MODE(2) button on remote control to select the Bluetooth function,
the display shows "BLUE";
2. In the Bluetooth mode, the symbol
3. Activate the Bluetooth feature on the external device to be coupled;
4. Initiate a search for devices. After select the "XF 3200 PRO";
5. Enter the password "0000" if required;

6. Press the (19) button on the unit or the key(5) on remote control, to start playing and the buttons
or 9 /CH-/VOL-(18) on the
PLAY ON INPUT USB/SD
1. Turn on the unit;
2. Insert a USB memory or an SD card into the USB or SD(8 and 19) slot. Playback starts automatically;
3. To pause playback, press the
4. To resume playback, press the
:
5. Press /CH+/VOL+(20) button on unit
9
Press the /CH-/VOL-(18) button on unit
6. Using the numeric keypad(7) on remote control you can directly enter the number of the song you want to play;
7. Press once REPEAT button(14) on on unit or RPT button(6) on remote control, the display will show "ONE", to continually
play the same track; press it a second time, the display will show "ALL" to continuously play all songs in the USB/SD.
Note:
- The player may not support some USB/SD devices, this is due to the incompatibility of some processors.
- To avoid harmful interference, always connect USB devices directly to the unit, do not use extension cords.
- From the computer to format the USB memory/SD in FAT(16 or 32).
AUX-IN
1. Press the MODE button(17) on unit or press MODE button(2) on the remote control and select the "AUX" function;
2. Connect any unit equipped with audio output, through a cable 3.5mm jack (included) to the AUDIO INPUT(25) in the back
side;
3. Use the external device from their commands.
BATTERY AUXILIARY CONNECTION
The appliance is set up to connect an auxiliary battery if you were with the internal battery completely empty and there was no
possibility of connecting the appliance to a mains socket.
Use the rear socket (23) and connect an external 12V battery making sure to respect the indicated polarities.
on display will start flashing, the system automatically enters search mode;
unit, or the keys : /CH+(10) and

(19) button on the unit or the key

(19) on the unit or the key
:
or key /CH+(10) on remote control while listening to switch to the next track.
9
or /CH-(4) on remote to go to the previous tracks;
9 /CH-(4) for selection of songs.

(5) on remote control, the display will show "PAUS";

(5) on the remote control;
13
XF 3200 PRO
:
/CH+/VOL+(20)