Using The Microphone - Trevi XF 500 Mode D'emploi Et Branchement

ENGLISH
AUX-IN
1. Turn on the unit and repeatedly press the MODE button(13) on the unit, or the MODE button(28) on the remote control and select the "LINE".
2. Connect any unit equipped with audio output via a dedicated 3.5mm jack cable (not included) to the LINE IN(8).
3. Adjust the external device from their commands.
2. Connect any unit equipped with audio output through a cable 3.5mm jack (not included) to the AUX IN(11).
3. Use the external device from their commands.

USING THE MICROPHONE

1. Connect the supplied microphone into the jack MIC(9).
2. Turn on the microphone using the switch on the handle of the microphone to the ON position.
3. Adjust the volume(2) of the microphone input and the echo effect(7) as desired using the appropriate commands.
SPECIFICATIONS
Power Supply:
Maximum output power:
Unit size:
Weight:
INFORMATION NOTE ON THE REMOVAL AND DISPOSAL OF BATTERIES
Warning: Only high-qualified personnel should perform this operation!
BATTERY REMOVAL
The appliance should not be plugged to the mains socket when performing this operation!
1. Remove the screws that secure the rear panel speaker amplified and remove the panel;
2. Locate the battery;
3. Remove the screws that secure the supports of the battery, remove the supports, disconnect the battery and remove it.
Used batteries should not be disposed of with household waste or thrown into fire or water. Used batteries should be recycled or disposed of in
separate waste collection centres.
....................................DC 15V, 2A - internal lead acid rechargeable battery 12V, 2.6A
.................................................................................................... 25W
................................................................................ 380x245x210mm
.....................................................................................................4 kg
9
XF 500