Mounting; Connecting The Anti-Static Bar; Connect Anti-Static Bar With The Power Cable - Simco-Ion Vicinion Notice D'utilisation

5.3 Mounting

Figure 4: mounting

5.4 Connecting the anti-static bar

Warning:
- Read the warnings at the beginning of this section.

5.4.1 Connect anti-static bar with the power cable

- Read this instruction before connecting the anti-static bar to the connector of the
cable!
Figure 5: connecting the connector
Vicinion_UM_9752152141_NL_D_GB_F_V1_3
Sliding and removable mounting bolts
Can be set as required
The connector on the bar and the connector on the cable
are V shaped, to align the correct contact pins.
Make sure the V shapes are aligned!
This can be easily done wrong.
The bar will not be damaged, but it will not function.
GB
BE
36