Installation - Simco-Ion Vicinion Notice D'utilisation

Figure 2: Dimensions Vicinion

5 Installation

Warning:
- Electrical installation and repair must be carried out by a qualified electrician and in
accordance with national and local regulations.
- The equipment must be properly grounded. Grounding is necessary for proper and
safe operation and prevents electric shock when touched.
- When working on the equipment, the equipment must be voltage-free.
- The anti-static bar must be powered only by a Limited Power Source (LPS) or NEC
Class 2 power supply. An LPS certified power supply has a limited output power
ensuring that it always continues to generate a safe output voltage.
The 0V of the power supply output must be properly grounded (see section 5.6).
The anti-static bar can be powered by an already available 24 V DC power supply on the
machine (which meets the above requirements), but also by a SIMCO (Nederland) B.V. desktop
power supply.
Article number Description
4524001500 Desktop, 100 - 240 V AC to 24 V DC for 1 anti-static bar (IP40)
UL-recognized.
The power supplies below should not be used in the United States or Canada:
Article Number Description
4524001000 Desktop, 100 - 240 V AC to 24 V DC for 1 anti-static bar (IP40).
7519020435 DIN rail power supply, 100 240 V AC to 24 V DC for maximum
50 anti-static bars (IP20).
7519020425 DIN rail power supply, 100 240 V AC to 24 V DC for maximum
20 anti-static bars (IP20).
The power supply must be connected to the anti-static bar with a suitable cable, see sections
5.4.2 and 5.4.3 and the page Spare parts at the end of the manual.
Vicinion_UM_9752152141_NL_D_GB_F_V1_3
Effective length = (n-1) x 17,25 mm
Total length = Effective length + 38,7 mm
n = number of emitters
GB
BE
34