Double Insulation For Safer Operation - Metabo HPT C 12LDH Instructions De Sécurité Et Mode D'emploi

English

DOUBLE INSULATION FOR SAFER OPERATION

To ensure safer operation of this power tool, metabo HPT has adopted a double insulation design. "Double insulation" means that two physically
separated insulation systems have been used to insulate the electrically conductive materials connected to the power supply from the outer
frame handled by the operator. Therefore, either the symbol "
nameplate.
Although this system has no external grounding, you must still follow the normal electrical safety precautions given in this Instruction Manual,
including not using the power tool in wet environments.
To keep the double insulation system eff ective, follow these precautions:
* Only metabo HPT AUTHORIZED SERVICE CENTER should disassemble or assemble this power tool, and only genuine metabo HPT
replacement parts should be installed.
* Clean the exterior of the power tool only with a soft cloth moistened with soapy water and dry thoroughly.
* Never use solvents, gasoline or thinners on plastic components; otherwise the plastic may dissolve.
6
SAVE THESE INSTRUCTIONS
MAKE THEM AVAILABLE TO
OTHER USERS
OWNERS OF THIS TOOL!
" or the words and "Double insulation" appear on the power tool or on the
AND
AND