System Expansion; Registering Additional Cameras - Alecto DVM-350 Mode D'emploi

5

SYSTEM EXPANSION

5.1 GENERAL:
You can register up to 4 cameras on the DVM-350 parent unit. Via the menu of the
parent unit you can select the desired camera or you can watch the images of all
registered cameras in order (scan function).
Expansion cameras are available through the service department of Alecto via the
phone number 073 6411 355 (NL) , 03 238 5666 (B), 0180 503 0085 (D) or via
www.alecto.nl
Camera: +DVM-340.100
Power adapter: +DVM-340.042

5.2 REGISTERING ADDITIONAL CAMERAS:

1. Connect the power adapter to the new baby unit, plug the adapter into a 230V
2. Press and hold the parent unit button
3. Use the parent unit buttons
4. Shortly press the button
5. Within 10 seconds, shortly press the button PAIR at the rear of the new came-
6. After several seconds the parent unit will have detected the new camera and
54
DVM-350-manual-NL-FR-D-GB-v1.0.indd 54
wall socket and switch on the camera.
appears, followed by the camera number.
A ' ' after a camera number shows a camera is already registered at this
number. In this case, if you register a new camera at this number, then the
old camera will be disconnected; it is therefore advisable to use a camera
without ' '
ra. The indicator light at the front of the camera will start flashing quickly.
the images of this camera will be shown on the display of the parent unit.
until after 4 seconds the image '
/ to select a free 'camera connection'.
, the light will start flashing quickly.
6 TIP
6.1 GE
•
•
•
•
•
•
6.2 IN
•
'
•
•
6.3 RE
•
•
•
•
6.4 DE
•
•
22-3-2016 15:01:55