Alecto DVM-350 Mode D'emploi page 51

Night light:
1. Press and hold the button
2. Repeatedly press the button
3. Press the button
4. Shortly press the button
Brightness:
1. Press and hold the button
2. The symbol
3. Press the button
4. Shortly press the button
Don't forget that a high intensity uses more power. When using the parent unit
with the built-in battery, please select a low intensity to prolong the battery's life
span.
Temperature indication and warning:
The temperature of the room with the baby unit is shown above in the display of
on the parent unit. You can select to show the temperature in degrees Fahrenheit or
in degrees Celsius. Besides that, you can let the unit sound an alarm tone when
the temperature in the baby room becomes too high or too low.
1. Press and hold the button
2. Repeatedly press the button
w down, 3. Press the button
4. Shortly press the button
5. Use the button
nue). 6. Shortly press the button
splay 7. Use the button
s
8. Shortly press the button
As soon as the temperature becomes too low or too high, the unit will now sound
short alarm tones while the temperature display will start flashing on the display.
om 5 Don't forget that the temperature is only an indication and you must take into
account a possible deviation of + or - 2 degrees.
or you
DVM-350-manual-NL-FR-D-GB-v1.0.indd 51
ON or OFF.
or
will on the display, followed by the current setting.
or
high intensity (
or °F.
or
value for the temperature alarm.
or
prefer not to set a lower limit).
value for the temperature alarm.
or
prefer not to set a lower limit).
to open the menu, now release this button.
until ' ' appears on the display, followed by
to switch the night light on (' ON') or off (' OFF').
to save the setting and to close the menu.
to open the menu, now release this button.
to set the brightness from low intensity (
).
to save the setting and to close the menu.
to open the menu, now release this button.
until ' ' appears on the display, followed by °C
to switch between °C and °F.
, 'Lo' will appear followed by the lower threshold
to set the lower threshold value (or select OFF if you
, 'Hi' will appear followed by the upper threshold
to set the upper threshold value (or select OFF if you
to save the setting and to close the menu.
) to
51
22-3-2016 15:01:55