Alecto DVM-350 Mode D'emploi page 52

Switching display + sound off automatically when your baby is sleeping: (VOX)
You can set the baby monitor to only have images and sound when your baby is
crying.
When your baby is sleeping quietly, then the parent unit will also switch to a
sleeping mode. As soon as your baby starts crying, the display and sound will be
switched back on instantly.
1. Press and hold the button
2. Repeatedly press the button
3. Press the button
4. Shortly press the button
Automatic night vision:
The baby unit is provided with 6 built-in infra-red LEDs; these LEDs will automati-
cally switch on when the baby room becomes darker and they will switch off again
when it becomes light. The LEDs can light objects up to a distance of approxima-
tely 2 meters. When it's dark, that is when the night vision LEDs are switched on,
the images on the parent unit will be displayed in black and white.
Attention: infra-red light cannot be perceived by the human eye; that means you
cannot tell whether the infra-red LEDs are switched on with the naked eye. De-
pending on the type of the infra-red LED, you might be able to see a red glow.
52
DVM-350-manual-NL-FR-D-GB-v1.0.indd 52
the current level.
or
low sensitivity, your baby must be crying loudly before the baby
monitor switches on
...
...
...
high sensitivity, your baby only has to cry softly for the baby monitor
to switch on
OFF VOX switched off, the baby monitor will continuously show images
and transmit sounds of your baby
When the display and sound are switched off because of silence, you
can press a random button to switch the parent unit back on. The parent
unit will switch back off again after one minute.
to open the menu, now release this button.
until 'VOX' appears on the display, followed by
to set the activation level:
to save the setting and to close the menu.
Mu
Re
1.
2.
3.
22-3-2016 15:01:55