Speedlink Force Feedback Racing Wheel Mode D'emploi page 13

IMPORTANT: the mode must be set before starting the game, changes during
the game can cause problems.
Note that the game software you are using must support analogue mode to be
able to use this with the 4 in1 Force Feedback Racing Wheel.
Refer to the back of the game pack for the necessary information on this.
Re-assigning button functions
1. Press the mode button repeatedly until you are in teach mode
(orange LED).
2. Now press the button whose function you want to assign to a
different button.
3. Press the button to which you want to assign the function.
4. Press the mode button again to exit teach mode.
To reinstate the previous programming, select teach mode again and press the
button you have re-programmed.
Foot pedals and gear shift functions
Programming the foot pedals (all consoles)
1. Check which button serves as gas pedal in the game you are playing.
2. Press the mode button repeatedly until you are in teach mode.
3. Press the button that serves as gas pedal.
4. Now press the pedal you want to use as gas pedal and keep it pressed down.
5. Press the mode button again to exit teach mode.
To re-assign the brake pedal, use a corresponding procedure.
Setting up the handbrake
1. Some games support the handbrake function.
2. Press the mode button repeatedly until you are in teach mode.
3. Operate and hold the handbrake.
13 13
GB