Product Contents; Product Features - Speedlink Force Feedback Racing Wheel Mode D'emploi

Introduction
Thank you for purchasing the 4 in1 Force Feedback Racing Wheel. With four
different connections, this product lets you experience exciting racing on the
PlayStation 2, Xbox, GameCube and PC.

Product contents

• Racing wheel/clamps
• Pedal set
• Gear shift and handbrake
• GameCube adapter
• Xbox adapter
• USB adapter
• Power supply
• Drivers/manual

Product features

• Digital, analogue, teach mode
• Ergonomic racing wheel with rubberised grips
• Suction pads and clamps for reliable set-up on any table
Mounting the racing wheel and gear shift
• Check that the surface is level.
• For greater stability, use the supplied clamps to fasten the racing wheel and
gear shift to the table.
• Don't moisten the suction pads of the racing wheel.
Connecting the racing wheel to your PlayStation 2, GameCube or
Xbox
Note: Don't use the USB socket of your PlayStation 2 to connect the racing
wheel, as it will not work!
1. Connect the pedals and gear shift to the back of the steering column as
indicated by the markings by the individual sockets.
2. Connect the power supply cable to the back of the steering column.
3. Make sure the game console is switched off.
4. Connect the PlayStation 2 socket of the racing wheel to your PlayStation2.
To be able to connect the racing wheel to the GameCube or Xbox, connect
the appropriate adapter (supplied) for GameCube or Xbox to the PlayStation2
socket of the racing wheel (see diagram).
5. Switch on the game console.
11 11
GB