Compliance; Unpacking And Packing; Installing The Device - Kinetec Maestra Manuel D'utilisation

6. Compliance

The device Kinetec Maestra™ complies with the standards of Directive 93/42/EEC, and bears the EC mark.
The device Kinetec Maestra™ complies with the standards in force (IEC 60601-1-2) concerning the
electromagnetic compatibility of medical devices and IEC 60601-1 concerning electrical safety.
The device Kinetec Maestra™ meets the requirements of the Machinery Directive No. 2006/42/EC.

7. Unpacking and packing

Unpacking
When you unpack the machine, don't forget that you may
need to pack it up again. We recommend that you keep the
packaging materials, boxes and plastic bags.
Recommendations for plastic bags: do not put them over the
head as there is a risk of suffocation, and keep them out of
the reach of children.
Be careful with small-sized pieces: they could be swallowed
by a child.
Be careful with cables and wires: risk of strangulation.
Remove all the components from their packaging.
The accessories case is under the box for the machine. See
step 5.
Your machine is ready to be connected to the power supply.
(See page 5)
Packing
To prevent any problems when the machine is transported,
only pack it using its original packaging.

8. Installing the device

The device Kinetec Maestra™ machine is designed to be used in hospitals, clinics, doctors' offices or in
private homes (rental).
The machine must be installed on a flat surface that is wide enough to accommodate the entire device and
possibly the accessory case.
We recommend using the machine with a physiotherapy table in order to benefit from its adjustable height
and the large support area.
We do not recommend the use of a chair with castors.
Kinetec Maestra™
EN
3 / 23