Program Mode; To Enter A Program - Kinetec Maestra Manuel D'utilisation

12.8.

PROGRAM MODE

12.8.1.
Beginning
To switch off the unit
Press the 2 keys at the same time and switch
the unit ON
Then
To change the program if necessary
To choose the movement
To display the extension or flexion limit of the
movement
To change the limit if necessary
To confirm the new value, press another key
or wait more than 3 seconds
To record program 10
Then
OR
To cancel the program
To exit program mode, switch the unit OFF
and switch back ON.
Kinetec Maestra™

To enter a program

Keys to
press
or
or
Display
KINETEC
MAESTRA V01.4
PROGRAM 2
EMPTY
PROGRAM 10
EMPTY
PRONO/SUPINATION
-10 PRG no.10
WRIST EXT/FLX
-20 PRG no.10
WRIST+MP EXT/FLX
0 PRG no.10 60
ULNAR DEVIAT.
0 PRG no.10 40
THUMB OPPOSITION
0 PRG no.10 90
LG FING. EXT/FLX
0 PRG no.10 50
INTRINSIC +
0 PRG no.10 40
INTRINSIC -
0 PRG no.10 90
DISTAL EXT/FLX
0 PRG no.10 40
DISTAL EXT/FLX
0 PRG no.10 40
DIP EXT/FLEX
0 PRG no.10 40
DISTAL EXT/FLX
20 PRG no.10
SPEED: 2
FORCE: _
TIMER 00H00MIN
PAUSE LOW 0s
Save: + Clear:-
PROGRAM 10
SAVING
PROGRAM 10
CLEARING
KINETEC
MAESTRA V01.0
EN
Remarks
Welcome text displayed for 3
seconds
The program number blinks.
The new program number blinks.
10
20
The display indicates the movement.
Successive presses on the keys
or
allows you to select different
movements.
The value blinks.
The new value blinks.
70
While the value blinks press
the or
to change if necessary.
Program 10 has been recorded and
the display indicates the next
program so you can change another
program.
Program 10 has been removed and
the display indicates the next
program so you can change another
program.
To use the modified program see
page 10.
key
9 / 23