Maintenance And Cleaning; Cleaning The Unit - Oase AquaMax Eco Classic 1200 Notice D'emploi

- English -
Start-up
Attention! Sensitive electrical components.
!
Possible consequences: The unit will be destroyed.
Protective measures: Do not connect the unit to a dimmable power supply.
This is how to connect the power supply:
1. Switching on: Connect the unit to the mains. The unit switches on as soon as the power connection is established.
2. Switching off: Disconnect the unit from the mains.
Important:
When started up, the pump automatically performs a pre-programmed self-test of approx. two minutes length
(Environmental Function Control (EFC)). The pump detects if it is running dry / blocked or submerged. The pump

Maintenance and cleaning

Attention! Dangerous electrical voltage.
Possible consequences: Death or serious injuries.
Protective measures:
• Electrical units and installations with a rated voltage of U > 12 V AC or U >30 V DC located in the water: Isolate the
• Isolate the unit before starting any work.
• Secure the unit to prevent unintentional switching on.

Cleaning the unit

Note!
Recommendation on regular cleaning:
Never use aggressive cleaning agents or chemical solutions. These could attack the housing surface or
impair the function.
Recommended cleaning agent for removing stubborn limescale deposits:
After cleaning, thoroughly rinse all parts in clean water.
Clean the pump
1. Screw off the stepped hose adapter.
2. Remove screws.
required for operation.
3. Actuate the engagement hook and fold up the strainer
top casing.
Questions, problems, missing parts?
Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email
us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com
5