Oase AquaMax Eco Classic 1200 Notice D'emploi page 4

- English -
Installation and connection
Install the unit at a dry place
Install the unit so that it is not exposed to direct sun radiation.
1. Remove screws.
required for operation.
2. Actuate the engagement hook and fold up the strainer
top casing.
3. Remove pump.
4. Screw the stepped hose adapter including sealing ring
onto the inlet.
5. Shorten the stepped hose adapter to the diameter of the
hose used if necessary.
6. Connect the hose with the stepped hose adapter and
secure with a hose clip.
union nut.
7. Screw the stepped hose adapter including union nut and
sealing ring to the outlet.
8. Shorten the stepped hose adapter to the diameter of the
hose used if necessary.
union nut.
9. Connect the hose with the stepped hose adapter and
secure with a hose clip.
4