Oase AquaMax Eco Classic 1200 Notice D'emploi page 7

- English -
Troubleshooting
Issue
Pump does not start
Pump does not deliver
Pump switches off after a
short running period
Questions, problems, missing parts?
Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email
us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com
Cause
No mains voltage
Filter housing clogged
Filter housing clogged
Excessive loss in the supply
lines
Excessively soiled water
Water temperature too high
Pump has run dry
Impeller unit blocked
Solution
Check mains voltage; Check supply lines
Clean strainer casings
Clean strainer casings
– Select larger hose diameter
– Adapt stepped hose adapter to hose diameter
– Reduce hose length to reduce frictional loss
– Avoid unnecessary connection elements
Clean pump. The pump automatically switches on
again once the motor has cooled down.
once the motor has cooled down
Flood pump. Fully submerge the unit when
operated in the pond.
Disconnect the power supply and remove
obstacle. Then switch the pump on again.
7