Installation And Connection - Oase AquaMax Eco Classic 1200 Notice D'emploi

Masquer les pouces Voir aussi pour AquaMax Eco Classic 1200:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

- English -

Installation and connection

Attention! Dangerous electrical voltage.
Possible consequences: Death or serious injuries due to operation of this unit in a swimming pond.
Protective measures:
• Do NOT use this unit in a swimming pond.
• Adhere to national and regional regulations.
Attention! Dangerous electrical voltage.
Possible consequences: Death or serious injuries.
Protective measures:
• Electrical units and installations with a rated voltage of U > 12 V AC or U >30 V DC located in the water: Isolate the
• Isolate the unit before starting any work.
• Secure the unit to prevent unintentional switching on.
Important:
Always place the unit below water level.
It is recommened to place the unit horizontally on the
ground ensuring its stable position.
Operating the unit in the pond
The pump is in the pond. The return system, e.g.
1. Screw the stepped hose adapter including
union nut and sealing ring to the outlet.
2. Shorten the stepped hose adapter to the
diameter of the hose used if necessary
tightening the union nut.
3. Connect the hose with the stepped hose
adapter and secure with a hose clip.
Questions, problems, missing parts?
Before returning to your retailer, call us at 1-866-627-3435, 8 a.m.-6 p.m., EST, Monday-Friday, or email
us at customercare@oase-livingwater.com. Or visit our website at www.oase-livingwater.com
.
3

Publicité

Table des Matières
loading

Table des Matières