Device Overview; Package Contents; General Description - ADEUNIS LoRaWAN Smart Building COMFORT Guide Utilisateur

LoRaWAN Smart Building COMFORT - Guide utilisateur / User guide version V2.1.1

1. DEVICE OVERVIEW

Description:
• Le LoRaWAN Smart Building COMFORT from adeunis® is a ready-to-use radio transmitter for measuring ambient temperature and humidity.
• This device meets the needs of users to monitor the temperature and humidity of their buildings via an LPWAN network.
• The device issues data periodically or when thresholds are high or low.
• The user can access the transmitter configuration locally via a micro-USB port or remotely via the LoRaWAN network, letting you configure, in
FR
particular, periodicity, sending modes and alarm thresholds.
• The LoRaWAN Smart Building COMFORT is powered by a changeable internal battery.
• It also has a button that send frames when pressed.
• The device is compatible with the adeunis® KARE Device Management platform and the KARE+ service.
IMPORTANT NOTE: The LoRaWAN Smart Building COMFORT is delivered by default with an OTAA configuration, so the user can declare the
device to a LoRaWAN operator EN
To start the LoRaWAN Smart Building COMFORT, use the button on the side of the case

Package contents

The device is delivered in a carton package containing the following: Front panel, rear panel and electronic card, Removable LiSOCl2 FANSO
(battery-pack ER18505H+W36+51021), 2 x CBLZ 3.5x 19mm screws, 2 x SX5 Fischer plugs

1.1. General description

Opening the caser
LEDs Start button and connected but- 2 fixing screw locations
ton (function Digital Input 1)
Physical socket location for terminal block (Digital Input 2)
Page 35 of 51