Device Overview; Package Contents; General Description - ADEUNIS Sigfox DELTA P Guide Utilisateur

Sigfox DELTA P - Guide utilisateur / User guide version V2.0.1

1. DEVICE OVERVIEW

Description :
• The adeunis Sigfox DELTA P is a ready-to-use radio transmitter that measures either a pressure delta between the inside of a ventilation
box and atmospheric pressure or a pressure delta on either side of an element (e.g. filter).
• The product meets the needs of users who want to remotely monitor a ventilation system.
• The product sends data at pre-set intervals or when the high or low thresholds are exceeded.
• The user may access the transmitter configuration locally via a micro-USB port or remotely via the Sigfox network, allowing in particular
the setting of the sampling period, transmission modes or alarm thresholds.
• The product also contains 2 digital inputs/outputs for coupling with newer systems with dry contact outputs and 1 Analog input 0-10 V
for coupling with a 0-10 V sensor (current clamp for example).
• The Sigfox DELTA P is powered by a replaceable internal battery pack.
• The product is compatible with adeunis's KARE+ service offer.
IMPORTANT NOTE 1: The Sigfox DELTA P is delivered by default with an OTAA configuration, so the user can declare the device to a Sigfox
operator

Package contents

The device is delivered in a carton package containing the following:
Front panel, rear panel and electronic board, Removable LiSOCl2 FANSO (battery-pack ER18505H+W36+51021), 2 x CBLZ 3.5x 19mm screws,
2 x SX5 Fischer plugs

1.1. General description

Front side
Cable gland
Right side
Placements for
fixing screws
Magnet slot
for starting the
product
Wire passage
placement for terminal
digital inputs/
block (
outputs
or 0-10V)
Placement of
external tubes for
pressure
Left side
Screw for fixing the
EN
Rear side
base plate
Page 35 of 50